Browse Title Index


 
Issue Title
 
Vol 3, No 1 (2013) A Novel Technique for Improved Recovery of Mg-Analysis of the Microstructure and Physical Properties Abstract
B. P. Samal, A.K. Misra, S.C. Panigrahi, S.C. Mishra
 
Vol 1, No 1 (2011) A REVIEW OF THE BIONIC SURFACES FOR ENGINEERING APPLICATIONS Abstract
Sandeep Harish Deshmukh, Chandrashekhar L. Gogte
 
Vol 7, No 1 (2017) A Review on an Investigation on the Effect of Immersed Medium in Friction Stir Welding of Aluminium Alloys (AA 6061-T6) Abstract
Satyam Patel, H.N. Shah
 
Vol 4, No 2 (2014) A Study of Improvement of Mechanical Properties of Aluminum by Conventional Casing and Deformation Process Abstract
Hafiz Abdul Ahad Qazi
 
Vol 4, No 3 (2014) Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel Abstract
Nurudeen Salahudeen, C. S. Ajinomoh, S. Nakakana
 
Vol 1, No 1 (2011) Al-MMC FOAM: SYNTHESIS AND CHARACTERISATION Abstract
Joyjeet Ghose, Vinay Sharma, Surender Kumar
 
Vol 3, No 2 (2013) An Austempering Study of Ductile Iron and the Effect of Copper Addition on the Tensile Properties of Austempered Ductile Iron Abstract
S. K. Sahoo, S.C. Patnaik, S. Sen, J. Majhi
 
Vol 3, No 2 (2013) An Investigation on Effect of Welding Current Mode on Weld Quality Characteristics of Microplasma Arc Welding of Inconel 625 Sheets Abstract
Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao
 
Vol 5, No 1 (2015) Analysis of Friction Stir Welded Aluminum Alloys 2014 and 8011 Abstract
Rajesh Kannan G, Murali K, Deepan Bhararhi Kannaa T.
 
Vol 6, No 2 (2016) Analysis of Process Parameters for Dissimilar Metal Welding Using MIG Welding: A Review Abstract
Pratik Kikani
 
Vol 2, No 3 (2012) Analysis of Properties of Copper-Alumina Composites Produced by Various Processing Routes: A Review Abstract
S. Gupta, K. Dash, B. C. Ray
 
Vol 3, No 3 (2013) ANN Controlled Plasma Spray Process by using Industrial Waste Abstract
Ajit Behera, P. Parida, R. K. Behra, S.C. Mishra
 
Vol 6, No 1 (2016) Anodic Polarization Study on Steel Bar in Concrete Powder Solution Extracts Contaminated with Chloride and Sulfate Salts Abstract
Harshavardhan N. Shinde, Bulu Pradhan
 
Vol 2, No 3 (2012) Application of Neural Network Analysis to Correlate the Properties of Plasma Spray Coating Abstract
Ajit Behera, S. C. Mishra
 
Vol 5, No 2 (2015) Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields: A Review Abstract
Mallik Kedar Mantrala, Ch. Srinivasa Rao, V.V.S. Kesava Rao
 
Vol 5, No 1 (2015) Behavior of Sandwich Composites under Edgewise and Flatwise Compression; Effect of Variation of Fibre Architecture and Core Density Abstract
Manujesh B. J, R. Vijayalakshmi Rao, Prajna M. R., Jnanesh N. A., Antony P. J.
 
Vol 1, No 2 (2011) Behaviour of NINL Blast Furnace with 100% Calibrated Lump Iron Ore Abstract
Santosh Kumar, R K Jha, N G Banerjee
 
Vol 2, No 2 (2012) Breakout Problems Study of Continuous Casting Steel Abstract
Saheb Mohammed Mahdi
 
Vol 4, No 3 (2014) Bulk Polycrystalline Ceramic Nanocomposites for Structural Applications: Present Issues and Perspectives Abstract
Luv Gurnani, Sadavijay Vishwanathe, Amartya Mukhopadhyay
 
Vol 3, No 3 (2013) Centrifugal Casting of Nano Crystalline TiB2 Reinforcement Particulate Reinforcement in Al-Alloy Matrix Abstract
V. M. Nimbalkar, B.R.K. Rao, V.P. Deshmukh, K.V. Marathe, N. Eswara Prasad
 
Vol 3, No 2 (2013) Chemical Synthesis of Zinc Oxide Nanoparticles and Characterization Abstract
Krishnamoorthy Sivakumar, Periyaswamy Subramanian
 
Vol 7, No 2 (2017) Comparative Study of Parabolic Leaf Spring and Different Materials Abstract
Shubham Singh, Arun Singh Kushwah
 
Vol 2, No 1 (2012) Comparison of Mechanical Properties of Resin-based Dental Composites with Different Filler Types Abstract
Umesh Vishnu Hambire, Prof.(Dr.) Vipin Kumar Tripathi
 
Vol 6, No 2 (2016) Comparison of PQR and WPQ for Jacket Long Seam Joint of Pressure Vessel as per ASME Section IX Abstract
Sagar I. Shah, Jinesh B. Shah
 
Vol 5, No 1 (2015) Comparison of RSM and ANN Modeling Approaches in Predicting the Laser Phase Transformation Hardening Parameters on the Heat Input and Hardened-Bead Profile Quality of Unalloyed Titanium Abstract
Duradundi Sawant Badkar, Krishnashankar Pandey, G. Buvanashekaran
 
1 - 25 of 117 Items 1 2 3 4 5 > >>