Browse Title Index


 
Issue Title
 
Vol 2, No 3 (2015) An Overview: Design of Nanocomposite Coatings Abstract
Gopalakrishna H D, Kaushik V Prasad
 
Vol 2, No 2 (2015) Applications of Shape Memory Alloys: A Review Abstract
S.C. Mishra
 
Vol 2, No 2 (2015) Characterization of Fly-Ash and Cold Setting Resin Powder Compacts Abstract
S.C. Mishra, S. Kumar, A. Pattanaik
 
Vol 4, No 1 (2017) Combined Effect of Welding Speed and Tool Pin Profiles on Tensile properties of FSWAA6061-T6 Joint Abstract
Satyam Patel, H. N. Shah
 
Vol 1, No 2 (2014) Corrosion Resistance of HVOF and Plasma Sprayed Ni-Cr/WC-Co Coatings Abstract
P Selvakumar, Mohamed Ismail M., Sathiyaseelan P., Praveen S A
 
Vol 2, No 1 (2015) Deposition of Antimony Trioxide on the Composite Surface to Increase Its Flame Retardancy Abstract
Ali I. Al-Mosawi, Shaymaa Abbas Abdulsada
 
Vol 4, No 2 (2017) Design and Analysis of Different Welding Joints Abstract
Sashikant Singha, Trilok Chauhan
 
Vol 2, No 2 (2015) Design and Analysis of Water Based Core Technology for a Casting of Light Weight Alloys: Core Casting Abstract
Vijaykumar A. Radadiya Radadiya, Komal G. Dave
 
Vol 3, No 1 (2016) Detailed Study On Physical Properties Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapour Deposition System Abstract
Madhura N Talwar, S.R. Yadhuraj, T.K. Subramanyam
 
Vol 2, No 3 (2015) Determining the Effect of Cutting Parameters on Surface Roughness in Turning Process Using the Taguchi Method Abstract
Basil Thankachan, Gracious George, Pranav S, Amal Chandy
 
Vol 3, No 2 (2016) Development of Mathematical Model for Tool Wear Rate Using 3-Level Response Surface Methodology Abstract
Tilak D Sonani, Deepak Kumar Kushwaha
 
Vol 2, No 3 (2015) Development of Primer as a Value Added Product from Waste PET Abstract
Aarti More, ST Mhaske
 
Vol 4, No 2 (2017) Effect of Dry Carbon Fibers on the Mechanical Properties of G801 Carbon Fiber Reinforced Composites Abstract
Yashaswi Khandelwal, Santosh Kumar Panda
 
Vol 3, No 1 (2016) Effect of Mould Cavity Thickness on Cooling Rate of Aluminium with Temperature Dependent Properties Abstract
Shubhi Yadav, Jitendra Jayant
 
Vol 4, No 1 (2017) Effect of Spray Pyrolysis on the Properties of Chemically Sprayed CuO: Al Thin Films Abstract
S. MUTHUKRISHNAN, Venkat Subramaniam, T. Mahalingam, S.J. Helen, P. Sumathi
 
Vol 3, No 2 (2016) Effect of Surface Texture on Pressure Distribution in Hydrodynamic Journal Bearing Abstract
Bholu Singh Tomar, Chandra Shekhar Malvi
 
Vol 2, No 1 (2015) Effect of Thickness in Electroluminescence Spectra on 2-5 Dialoxy-PPV (ROPPV) Films Abstract
Anjali Kanojia
 
Vol 4, No 2 (2017) Effective Design of Riser for Defect-Free Casting Abstract
Aman Emmanuel, Arun Singh Kushwah
 
Vol 3, No 3 (2016) Effects of Carbon Fiber on Strength of Concrete Abstract
B. B. Patil, A. G. Dahake, V. R. Upadhye, C.L. Gogte
 
Vol 3, No 3 (2016) Effects of Weight Fractions on Properties of Aluminium-Fly Ash Metal Matrix Composites Abstract
Pankaj Kr. Sharma, Shashi Prakash Dwivedi, Vijay Gautam, Amit Kr. Sharma
 
Vol 3, No 3 (2016) Efficiency Measurement of Solar PV Panels Abstract
Kedar A. Pathak, Snehal N. Patel
 
Vol 3, No 1 (2016) Evaluation of Anti-Oxidant Properties of Lemon Grass Essential Oil in Inhibiting Corrosion of Mild Steel Abstract
S. Halilu, B.O. Atolaiye, T. Nafi’u, B. Alhassan
 
Vol 1, No 3 (2014) Experimental Investigation of Dilution Control Using Advanced Gas Metal Arc Welding Process Abstract
Pankaj Kumar Mistry, Sunil Pandey
 
Vol 3, No 3 (2016) Fabrication of the SU-8 based Glass Microfluidic Devices to Record the Surface-Driven Capillary Flow of Water Abstract
Subhadeep Mukhopadhyay
 
Vol 2, No 3 (2015) Hard and Wear-Resistant Nanocomposite Thin Film Coatings Abstract
Gopalakrishna H D, Kaushik V Prasad
 
1 - 25 of 44 Items 1 2 > >> 


ISSN: 2455-3344