Browse Title Index

Issue Title
Vol 2, No 1 (2015) A Review of Fluid Flow and Heat Transfer in Impinging Jet System Abstract
P. Kalaichelvi, Tamilselvi Sundararaju
Vol 2, No 1 (2015) A Review on Test Facility for Measuring Pressure Drop in Hydroformed Cryopanel Abstract
Ketan Ramani, Jiten Makadia
Vol 2, No 2 (2015) A Review on Use of CFD in Combustion Modelling Abstract
Nikita Banger, S Prasad
Vol 2, No 2 (2015) A Short Review on Fines Migration Through Porous Media Abstract
Pratiksha R. Kale, Somnath Nandi
Vol 3, No 1 (2016) A Study and Thermal Analysis of Automobile Radiator Using Nanofluids Abstract
karthick selvam, Murali K, Pradeep Castro P
Vol 2, No 3 (2015) Aerodynamic Analysis of Formula 1 Race Car: A Case Study Abstract
Prashant Sudhiranjan Rade
Vol 1, No 2 (2014) Analysis of Flow through Main Engine Control Unit (MECU) of a New Aircraft Fuel Control System under Various Aircraft Acceleration Abstract
Arun Kumar, Kamlesh Goyal, Pradyumna Ghosh, Ankit Gopal Pandey
Vol 2, No 1 (2015) Applications of CFD in Car Design Abstract
Prashant Sudhiranjan Rade
Vol 2, No 3 (2015) CFD Analysis of Heat Transfer Enhancement in a Circular Pipe Flow by Swirl Flow Abstract
Dilbagsingh chandrabhan mondloe
Vol 3, No 2 (2016) Comparison of Stack Type EGR Cooler for Diesel Engine using CFD Abstract
Raghvendra S. Bhadouriya, Pawan Detwal
Vol 1, No 1 (2014) Determination of Maximum Allowable Pump Speed for Transferring Fluid to a Vertical Height at Constant Power Abstract
Bashar Dan-asabe, S. A. Yaro, D. S. Yawas, S. Y. Aku
Vol 1, No 3 (2014) Development of Inhibitive Water-based Drilling Fluid System for Shale Formation Abstract
Rajat Jain, Tinku Saikia, Vikas Mahto
Vol 3, No 3 (2016) Effect of Barrel Radius on the Billet in the Upsetting Process Abstract
P. Sharma, M.S. Khidiya, M.A. Saloda, B.P. Nandwana
Vol 2, No 3 (2015) Effect of Distributor Angle Variation on Flow Characteristics in a Hollow Frustum: A Numerical Study Abstract
Albert Antony, Basil George, Eldho Soman, Jerin Johnson
Vol 1, No 2 (2014) Effect of Fly Ash on the Rheological and Filtration Properties of Palm Oil-in-Water Emulsion Based Drilling Fluid Abstract
Rajat Jain, Navin Kumar, Vikas Mahto
Vol 2, No 3 (2015) Estimation of Oxygen and Carbon Dioxide Compositions in Coal Combustor: CFD Approach Abstract
Vol 3, No 3 (2016) Evaluation of Surface Crack in EN19 Crank Shaft Found in Forging Process: A Review Abstract
Aditya Singh, G. D. Acharya, Biren J. Sarvada
Vol 3, No 2 (2016) Exergy Analysis of Evacuated Tube Two Fluid Solar Water Heating System Abstract
N. Yadav, A. Tripathi
Vol 3, No 3 (2016) Experimental Set Up of Optical Tomography Probe and Visualization of Characteristics of a Taylor Bubble Abstract
Snehal N. Patel, Kedar A. Pathak
Vol 3, No 2 (2016) Experimental Setup to Evaluate Force Exerted by Water Jet Entering Tangentially on Curved Surface Abstract
Shivaji Shelar, Joy Moraes, Avanti Kadam, Viraj Parmar, Shivaji Shelar, Bhushan Sonawane
Vol 4, No 1 (2017) Experimental Studies on the Effects of Liquid Viscosity and Surface Wettability in PMMA Microfluidic Devices Abstract
Subhadeep Mukhopadhyay
Vol 3, No 3 (2016) Experimental Studies on the Surface-Driven Capillary Flow of Ethanol in the Microfluidic Microchannel Bends Abstract
Subhadeep Mukhopadhyay
Vol 4, No 2 (2017) Fabrication and Analysis of Evacuated Tube Solar Air Heater Abstract
Ajay Tripathi, H. Chandra, Rudra Pratap Singh
Vol 4, No 1 (2017) Fluid Flow Analysis and Flow Path Optimization of a Centrifugal Fuel Injector for a Turboshaft Aero Engine Abstract
Manjunath I B, Venkatesh M. Kulkarni, Shrutika Dargopatil
Vol 1, No 3 (2014) Fluid Flow and Solidification Analysis in Gravity Die Casting (GDC) Abstract
Ashwin C. Gowda, H M Mahendra, D P Girish
1 - 25 of 45 Items 1 2 > >> 

ISSN: 2455–1961