Review on Design and Development of Hydrogen Production System using HHO Dry Cell Method

Autores/as

  • Chauhan Krishna K.

Resumen

The current work aims to review an experimental setup for the production of HHO gas. It involves the production of HHO gas by dry cell method, and selecting an appropriate electrolyte for production of HHO gas. The system involves sizing and selection of components like bubbler, measuring devices, moisture removal dryer and safety device like flash back arrestor. HHO gas thus produced can be used in a brazing, welding and burner touch etc. The experiment proposes the production of HHO gas from renewable sources like PV to enable conversion of energy in desired usable form. Here we have developed a 1 to 1.5 LPM of HHO production by a two cell stack series using 12 plate of SS-316L. The plate size is 7*7 mm which is 1.5 mm thick and produces a flame by varying the concentration of KOH with water.  Keywords: Electrolysis, Hydrogen cell, HHO gas production, Operating parameter, Changing Concentration electrolyte, Safety component, Burner application Cite this Article Chauhan Krishna K. Review on Design and Development of Hydrogen Production System using HHO Dry Cell Method. Journal of Alternate Energy Sources and Technologies. 2016; 7(2): 56–59p.

Descargas

Publicado

2016-08-16

Número

Vol. 7 Núm. 2 (2016)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.