Effects of Oil Extraction Methods on Bio-diesel Production from Wild Grape Seeds: A Case Study of Soxhlet Extraction and Mechanical Press Engine Driven Expeller Methods

Autoři

  • M.U. Kaisan National Center for Energy Efficiency and Conservation, Energy Commission of Nigeria, University of Lagos
  • G.Y. Pam Ahmadu Bello University, Zaria
  • D.M. Kulla Ahmadu Bello University, Zaria
  • A.J. Kehinde

Klíčová slova:

Bio-diesel, Mechanical Press, Soxhlet Extraction, Wild Grape Seeds

Abstrakt

In this research, two samples of wild grape seeds (Lannea Microcarpa) were used to produce biodiesel. The first sample was washed; dried and powdered, oil was extracted from the sample using soxhlet extraction method with n-hexane as solvent. The second sample was washed and dried, oil was extracted from the sample using mechanical press engine driven expeller. The oil yield from the first method was 33.3% while the oil yield from the second sample was initially 12.5% with very high free fatty acid (FFA), and then later increased to 37.5% after the FFA was reduced using acid esterification reactions on the sample. The FFA of the first sample was 5.11% while that of the later was 42% but reduced to 2.54 after a repeated trans-esterification reaction. The mechanical press method was better in terms of production process, production time and the oil yield and hence suitable for industrial applications.Keywords: Bio-diesel, mechanical press, soxhlet extraction, wild grape seedsCite this Article: Kaisan MU, Pam GY, Kulla DM, et al. Effects of Oil Extraction Methods on Bio-diesel Production from Wild Grape Seeds: A Case Study of Soxhlet Extraction and Mechanical Press Engine Driven Expeller Methods. Journal of Alternate Energy Sources and Technologies. 2015; 6(1): 35-40p. 

Biografie autora

  • M.U. Kaisan, National Center for Energy Efficiency and Conservation, Energy Commission of Nigeria, University of Lagos
    Research Felow
  • G.Y. Pam, Ahmadu Bello University, Zaria
    Reader, Department of Mechanical Engineering
  • D.M. Kulla, Ahmadu Bello University, Zaria
    Senior Lecturer, Department of Mechanical Engineering

Stažení

Publikováno

2015-03-16

Číslo

Vol 6 No 1 (2015)

Sekce

Review Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.