Experimental Investigation on the Production and Usage of UCVO and WSLO as an Alternative Fuels to Diesel Engines

Forfattere

  • Mohammed Yunus Umm Al-Qura University, makkah, Kingdom of saudi arabia.
  • Mohammad S. Alsoufi Umm Al-Qura University, makkah, Kingdom of saudi arabia.
  • Iftekar Hussain H.

Nøgleord:

WSLO, UVCO, Energy, transesterification, Compression ratio, Emission, Centrifugation

Resumé

Recently, black/biodiesels are gaining wider popularity as they can be made from renewable resources and wastages, thus, providing an extra environmental values. Indeed, reuse of the waste spent lubrication oil (WSLO) and used vegetable cooking oils (UVCO) has attracted researchers as the wastes generated are on a massive level everywhere and are posing an environmental hazard in handling serious problems of waste management. The transesterification process and centrifuge operations are addressed in terms of conversion to biodiesel. UVCO and WSLO samples were tested on a diesel engine to determine the performance as well as emission characteristics. The filtration of raw oil was carried out by indigenously developed and fabricated mobile centrifuge oil cleaner involving two-stage filtrations (first and second stage guaranteeing the purity up to 5-10 and 1 micron respectively). Thus, it helps to boost the production of alternate fuels by directly blending and mixing in the required proportions. With these significant inclusions, satisfactory results were obtained for use as a sustainable alternative fuel in an organized large quantity for the production of biodiesel. Therefore, UVCO and WSLO can be considered as a promising waste which can serve as a fuel energy source and material for chemical or biological processes.

Forfatterbiografier

  • Mohammed Yunus, Umm Al-Qura University, makkah, Kingdom of saudi arabia.
    Mechanical Engineering Department, Professor
  • Mohammad S. Alsoufi, Umm Al-Qura University, makkah, Kingdom of saudi arabia.
    Mechanical Engineering Department, Associate Professor

Downloads

Publiceret

2016-08-02

Nummer

Årg. 7 Nr. 2 (2016)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.