A Fuzzy Logic Based Electronics Load Controller for Self-excited Induction Generators

Autor/innen

  • Anjali Garg Department of EECE, ITM University,Gurgaon
  • K. S. Sandhu Department of Electrical Engineering, National Institute of Technology, Kurukshetra, India
  • L. M. Saini Department of Electrical Engineering, National Institute of Technology, Kurukshetra, India

Schlagwörter:

Self-excited induction generator, electronic load controller, fuzzy logic controller, PID controller

Abstract

This paper deals with the design and implementation of a fuzzy logic based controller for regulating the output voltage and frequency of a self-excited induction generator (SEIG). Electronic load controller (ELC) along with fuzzy logic controller (FLC) is used to maintain the electrical load constant at the output terminals. The controlling action will be taken by FLC whenever there will be the difference between the rated load current and the actual load current. Comparison between the output obtained using conventional controller and fuzzy logic based controller is also shown. It has been observed that by using conventional controller overshoots takes place whenever there is sudden variation in load while smooth changeover takes place in case of use of fuzzy logic controller. Results are simulated in Matlab/Simulink.Keywords: Self-excited induction generator, electronic load controller, fuzzy logic controller, PID controller 

Autor/innen-Biografien

  • Anjali Garg, Department of EECE, ITM University,Gurgaon
    Assistant Professor, EECE Department
  • K. S. Sandhu, Department of Electrical Engineering, National Institute of Technology, Kurukshetra, India
    Professor,Department of Electrical Engineering
  • L. M. Saini, Department of Electrical Engineering, National Institute of Technology, Kurukshetra, India
    Professor,Department of Electrical Engineering

Downloads

Veröffentlicht

2011-12-26

Ausgabe

Bd. 2 Nr. 2 (2011)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.