Study of Conversion of Vibration Energy into Electric Energy

Autor/innen

  • Himani B Kadam
  • Sainath V Shinde Assistant Professor,Mechanical Engineering department, PVPIT, Pune

Abstract

In the upcoming time, there is a serious threat on fossil fuels like diesel, petrol and natural gases, because all these fuels are non-renewable forms of energy. These source of energy depleted very rapid rate and after some decades they completely exhausted, so we should have to prepare to face this challenges. Alternative energy will become increasingly important as fossil fuel supplies inevitably run out or environmental damage sparks consumer awareness. Vibration energy (most waste form of energy) is one of the best alternative energy sources which can produce electric energy. Piezoelectric devices, used for harvesting the vibration energy of roads and walkways due to traffic, can produce electrical energy that is predictable (based on traffic patterns), and locally storable. There is a piezoelectric material which used for converting mechanical pressure (vibration) into electrical energy. Piezoelectric material works on the principle of the charge output signal proportional to the applied force or pressure. This review paper gives us an overall idea about conversion of vibration energy into electric energy and its application. Keywords: Vibration energy, piezoelectric materials, application   

Autor/innen-Biografien

  • Himani B Kadam
    UG Student,  Mechanical Engineering department, PVPIT, Pune
  • Sainath V Shinde, Assistant Professor,Mechanical Engineering department, PVPIT, Pune
    Assistant Professor, Mechanical Engineering department, PVPIT, Pune

Downloads

Veröffentlicht

2017-07-30

Ausgabe

Bd. 8 Nr. 2 (2017)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.