Production of Jatropha curcas L. Seed Oil DMC-Js-BioDs by Optimized Dimethyl Carbonate Using Potassium Hydroxide as Catalyst

著者

  • Balaji M. Panchal Nurture earth R and D, MIT, Aurangabad(MS), India
  • Hazem M. Kalaji

キーワード:

Alkali-catalyst、 Dimethyl Carbonate、 Jatropha curcus Seed Oil、 Magnesol powder、 Solvents.

要旨

AbstractThe use of Jatropha curcus L. seed oil as the feedstock for biodiesel (DMC-Js-BioDs) production has observed growing interest because it is a non-edible oil. In this study, the production of DMC-Js-BioDs from J. curcas seed oil with dimethyl carbonate (DMC) as the solvent was performed. The reaction was conducted in the presence of KOH as a catalyst to investigate the optimum conditions and study the effects of the variables on the reaction. These variables included seed oil to DMC molar ratios of 1:1 to 1:6, KOH catalyst concentrations of 0.5 to 2.5% on DMC basis, and 15 to 75 min reaction times at reflux temperature with agitation speeds of 25 to 175 rpm. The optimum conditions for DMC-Js-BioDs production were an oil to DMC molar ratio of 1:4, a catalyst concentration of 2.0% on DMC bases at reflux temperature and a reaction time of 60 min with 150 rpm agitation. The DMC-Js-BioDs yield under these optimum conditions was 96%, and all the measured properties of DMC-Js-BioDs met the specifications and international standards of ASTM D 6751-02. The experimental results showed that all the reaction variables in this research study had positive effects on the reaction.  Keywords: Alkali-catalyst, dimethyl carbonate, Jatropha curcus seed oil, magnesol powder, solventsCite this ArticlePanchal Balaji M, Kalaji Hazem M.Production of of Jatropha curcas L.Seed Oil DMC-Js-BioDs by OptimizedDimethyl Carbonate Using PotassiumHydroxide as Catalyst. Journal ofAlternate Energy Sources andTechnologies. 2017; 8(2): 56–63p.

著者略歴

  • Balaji M. Panchal、 Nurture earth R and D, MIT, Aurangabad(MS), India
    Nurture Earth R D D, Pvt. Ltd. MIT campous,Aurnagabad (MS),India

ダウンロード

追加ファイル

発行日

2017-08-31

巻号

巻 8 号 2 (2017)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.