Scramjet Combustor Development: A Review

Autor/innen

  • J. V. S. Moorthy
  • B. Rajinikanth
  • Dr. B. V. N. Charyulu
  • Prof. G. Amba Prasad Rao Dr.G.Amba Prasad Rao, Professor, Department of Mechanical Engineering, National Institute of Technology, WARANGAL-506 004 (A.P.) India

Schlagwörter:

Scramjet, combustor, supersonic combustion

Abstract

  In the development of scramjet engine, the combustor presents the most formidable problems. Combustor is the critical section due to practical constraints of suitable material, mixing and flame holding in the short span of length. The complex phenomenon of supersonic combustion involves turbulent mixing, shock interaction and heat release in supersonic flow. The flow field within the combustor of a scramjet engine is very complex and poses challenge in design and development of supersonic combustor. Sufficient and rapid fuel-air mixing to achieve the desired chemical reaction and heat release within the short residence time, minimization of stagnation pressure loss resulting in high combustion efficiency are the requirements in the design of supersonic combustor. This paper reviews the efforts in the development of supersonic combustors across the globe and details the efforts made with emphasis on fuel injection, mixing and flame stabilization schemes. Research efforts in the United States, Russia, France, Germany, Australia and Japan have been brought out and contemporary work on the subject in the above countries as well as China and India have been discussed.

Autor/innen-Biografie

  • Prof. G. Amba Prasad Rao, Dr.G.Amba Prasad Rao, Professor, Department of Mechanical Engineering, National Institute of Technology, WARANGAL-506 004 (A.P.) India
    Department ofmechanical Engineering and I am the 12 th Person in the seniority among 36 faculty of the Dept.

Downloads

Veröffentlicht

2012-12-27

Ausgabe

Bd. 2 Nr. 3 (2012)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.