Review of Application of Ceramic in High Temperature Environment

Авторы

  • Muhamad Nurizad Rosli
  • Wan Khairuddin Wan Ali Professor.Ir.Dr.
  • Mohd Yazid Yahya Dr.

Ключевые слова:

Ceramic, Rocket, Propellant

Аннотация

Ceramic become one of the potential materials that provide lots of advantages compare to metal. Generally it can withstand very high temperature without melting or decomposing which is good for thermal insulation. Ceramic materials are hard, brittle, and strong in compression, weak in shearing and tension. For decades, ceramic has been applied in high temperature environments such as in heat engine, turbine, and recently in rocket system. In high temperature application, the strength of material such as metal is decrease as the temperature increase. However, material such as ceramic having high melting point which suitable to be utilized in high temperature environment.

Биографии авторов

  • Wan Khairuddin Wan Ali, Professor.Ir.Dr.
    Head of Deparment of Aeronautics, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
  • Mohd Yazid Yahya, Dr.
    Lecturer in Department of Applied Mechanic,Faculty of Mechanical Engineering,Universiti Teknologi Malaysia,Skudai,Johor,Malaysia

Загрузки

Опубликован

2011-09-02

Выпуск

Том 1 № 2 (2011)

Раздел

Review Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.