Reformation of WLAN Feeler by Incorporating Varactor Diode with Negative Media Structure

Forfattere

  • Bimal Garg Madhav Institute of Technology and Science, gwalior
  • Ranjeet Pratap Singh Bhadoriya

Nøgleord:

Varactor diode, negative media (metamaterial), permittivity, permeability, bandwidth

Resumé

In this manuscript, authors proposed a negative media structure with Varactor diode to reform the rectangular microstrip patch antenna parameter to a great extent. Initially basic feeler was designed and simulated, and then parameters were enhanced by implementing negative media structure. It has been observed that negative media is not sufficient to improve the parameters therefore Varactor diode was introduced to get the required improvement. This proposed design of feeler was designed for L band, where operating frequency was 2 GHz. Varactor diode used in this design process was Silicon Diffused Junction Type Varactor Diode (SVC704). Return loss reduced from –11.57 to –35.97 dB, bandwidth increased from 26 to 54.6 MHz i.e., 110%. Efficiency also modified from 43.5 to 78.2%. 

Forfatterbiografi

  • Bimal Garg, Madhav Institute of Technology and Science, gwalior
    Electronics Engineering, Student

Downloads

Publiceret

2013-09-13

Nummer

Årg. 3 Nr. 2 (2013)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the manuscript entitled ‘______________’, hereby declare, that the above manuscript which is submitted for publication in the Journal, is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

I/ We have read the final version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship. We also agree to the authorship of the article in the following order:

Author’s name                                     Signature (s)

 

1. ________________

2. ________________

3. ________________

4. ________________