GFRC Beam Thickness Analysis Using FEM
Abstrakt
AbstractGlass fiber reinforced concrete (GFRC) beam thickness analysis has been studied in the present paper. GFRC is the widely used material in structures, over other materials to resolve the problems in concrete structures. They provide strength and stiffness to concrete beam. ANSYS has been utilized in the present work to the problem. Effect of thickness of the GFRC has been studied in the present paper by studying the deformation and strain generated. Four different sets have been modeled, all having the same outer dimensions. To change the thickness of GFRC concrete, beam dimensions have been reduced and results have been compared with the beam which is made of concrete only. Base beam dimensions are 250×450 mm2 and length is 3000 mm. Three thicknesses of GFRC have been considered 2, 3 and 4 mm. From the results it has been found that beam with 4 mm thickness GFRC shows less deformation compared to the other beams, which indirectly means that GFRC beam has higher strength compared to simple concrete beam. Weight comparison of all the beams has also been carried out which represents that with 4 mm thickness, GFRC is lighter in weight compared to the others. Keywords: Strenght, GFRC, Ansys, concrete beamCite this Article Pratap Dhakad, Rakesh Patel. GFRC Beam Thickness Analysis Using FEM. Journal of Construction Engineering, Technology and Management. 2017; 7(1): 22–29p.
Publikováno
Číslo
Sekce
Licence
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the manuscript entitled ‘______________’, hereby declare, that the above manuscript which is submitted for publication in the Journal, is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We have read the final version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship. We also agree to the authorship of the article in the following order:
Author’s name Signature (s)
1. ________________
2. ________________
3. ________________
4. ________________
