Use of Steel Slag in Fly Ash Based Concrete for White Topping
Schlagwörter:
Concrete, Fly ash, steel slag.Abstract
AbstractThe fast growth in industrialization has resulted in tons of by products or waste materials, which can be used as secondary cementitious materials such as fly ash, steel slag etc. The use of these byproducts not only helps to utilize these waste materials but also improves the properties of concrete in fresh and hydrated states. Steel slag and fly ash are the two materials used in concrete. Most concrete produced nowadays includes one or multiple materials. That is why their properties are usually compared to each other by mix designers, needed to optimize concrete mixtures. In the present work, a number of tests were carried out to make comparative studies of mechanical properties of concrete mixes prepared by using ultra tech brand Portland cement, fly ash in 20, 25, 30 and 35% proportions of replacement, steel slag in 20, 25, 30 and 35% of replacement. The fine aggregate used is natural sand belongs to zone II as per IS 383-1982. The coarse aggregate used is of 20 mm size. The properties were studied for 150 days for compressive and flexural strength. Keywords: Concrete, fly ash, steel slagCite this Article Patil RS. Use of Steel Slag in Fly Ash Based Concrete for White Topping. Journal of Construction Engineering, Technology & Management. 2016; 6(3): 63–69p.
Veröffentlicht
Ausgabe
Rubrik
Lizenz
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the manuscript entitled ‘______________’, hereby declare, that the above manuscript which is submitted for publication in the Journal, is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We have read the final version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship. We also agree to the authorship of the article in the following order:
Author’s name Signature (s)
1. ________________
2. ________________
3. ________________
4. ________________
