Tensile Capacity of Corroded Steel Section Strengthened Using Fiber Composite Wrap

Авторы

  • Baskar Kaliyamoorthy Associate Professor Department of Civil Engineering National Institute of Technology Trichy-620015 India
  • R. Anandapadmanabhan
  • M. Anand
  • V. Dwarakesh

Ключевые слова:

Composite, strengthening, corrosion, fiber, wrap, steel, carbon, glass

Аннотация

 Strengthening and rehabilitation of structures is a major concern for researchers in the civil engineering community in recent years due to the aging of structures and the need for effective methods of strengthening. Many researches are being carried out on strengthening of reinforced concrete structures using fiber composite materials. A very few researches are being reported on strengthening of corroded steel members using fiber composite materials. Since corrosion is an inevitable problem related to steel structures, especially in offshore oil and gas industry, it is very much essential to investigate the suitability of composite materials on structural steel section. In this present study, an experimental investigation is being carried out with 26 numbers of corroded steel coupon specimens with two different fibers – Carbon Fiber (CF) and Glass Fiber (GF). Strengthening was achieved by single and double layer wrapping of FRP to the steel plates and the tests were conducted. The test results show that FRP strengthening is capable of enhancing the tensile strength sufficiently provided adequate bonding is achieved.Keywords: Composite, strengthening, corrosion, fiber, wrap, steel, carbon, glass 

Загрузки

Опубликован

2012-05-26

Выпуск

Том 2 № 1 (2012)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the manuscript entitled ‘______________’, hereby declare, that the above manuscript which is submitted for publication in the Journal, is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

I/ We have read the final version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship. We also agree to the authorship of the article in the following order:

Author’s name                            Signature (s)

 

 

1. ________________

2. ________________

3. ________________

4. ________________