Comparative Realization of 2DoF PID Controllers for Flow Process with Measurement Delay

Autor/innen

  • Satheesh Babu R Department of Instrumentation and Control Engineering Manipal Institute of Technology Manipal 521706
  • Shreesha C Department of Instrumentation and Control Engineering, Manipal Institute of Technology, Manipal, India
  • Thirunavukkarasu I. Department of Instrumentation and Control Engineering, Manipal Institute of Technology, Manipal, India

Schlagwörter:

Flow process control, two degree-of-freedom PID controller, anti-integral windup, Smith predictor, large delay system

Abstract

Two Degree-of-Freedom (2DoF) PID control techniques presented in this paper were developed based on Hï‚¥ optimal control theory and with the Anti-Integral Windup (AIW) scheme. The controllers were implemented for a laboratory flow process setup. First Order Process with Dead Time (FOPDT) models had been identified by step testing. The process responses showed a significant non-minimum phase dynamics exhibited for the specific step inputs applied. The measurement delay was considered as large delay in the fast acting loop. In this work the 2DoF PID AIW control scheme was developed in association with the conventional Smith predictor to rectify the final control element’s delayed actuation. The objective of this work was to compare the realization of 2DoF PID controllers tuned for the flow process on the basis of time domain performances. The control system’s performances were analyzed for its ability to minimize the power consumption associated with the final control element. In this paper, it is shown that the 2DoF PID AIW controller performs betterthan Hï‚¥ PID controller and it is a simple and reliable control technique to implement for a real system.Keywords: Flow process control, two degree-of-freedom PID controller, anti-integral windup, Smith predictor, large delay system Cite this Article: Satheesh Babu R, Shreesha C, Thirunavukkarasu I. Comparative Realization of 2DoF PID Controllers for Flow Process with Measurement Delay. Journal of Control & Instrumentation (JoCI). 2015; 6(1): 1–8p.

Downloads

Veröffentlicht

2015-03-20

Ausgabe

Bd. 6 Nr. 1 (2015)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.