Performance Assessment of IRT Method for Distillation Model Control

Autor/innen

  • S. A. Misal Department of Chemical Engineering, Pravara Rural Engineering College, Loni, M.S. India
  • V. S. Sathe Chemical Engineering, Dr. Babasaheb Ambedkar Tech. University, Lonere, (M.S). India

Schlagwörter:

IRT, distillation, simulink, control ISE

Abstract

A Wood and Berry distillation column was considered for experimentation and the Improved Relay Tuning (IRT) method was applied for design of optimum PID settings. The closed loop response was obtained using optimum values of PID parameters and compared with that ofconventional relay method and other non relay method. The integral square error (ISE) criterion for the performance assessment was used and it was found that the integral error has been decreased by IRT method as compared to other methods. Hence the improved relaytuning method gives better performance for distillation column model.Keywords: IRT, distillation, simulink, control ISE Cite this Article Misal SA, Sathe VS. Performance Assessment of IRT Method for Distillation Model Control. Journal of Control & Instrumentation. 2015; 6(1): 27–30p.

Autor/innen-Biografie

  • S. A. Misal, Department of Chemical Engineering, Pravara Rural Engineering College, Loni, M.S. India
    Associate Professor,Department of Chemical Engineering,Pravara Rural Engineering College, Loni-413736, Dist-Ahmednagar, Maharashtra, India.

Downloads

Veröffentlicht

2015-04-06

Ausgabe

Bd. 6 Nr. 1 (2015)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.