Study and Design of PID Controller and State Observer Technique for Inverted Pendulum

Autor/innen

  • Keerthi Chacko Department of Electronics and Instrumentation Engineering, Vimal Jyothi Engineering College, Kannur, India
  • Vimal Kumar Department of Electronics and Instrumentation Engineering, Vimal Jyothi Engineering College, Kannur, India
  • Abdul Ltheef Department of Electronics and Instrumentation Engineering, Vimal Jyothi Engineering College, Kannur, India
  • Sheeba V Department of Electronics and Instrumentation Engineering, Vimal Jyothi Engineering College, Kannur, India

Schlagwörter:

Control system, state observer technique, pole placement, conventional controller, inverted pendulum

Abstract

AbstractThe inverted pendulum is a classic problem in dynamics and control theory and is widely used as a benchmark for testing control algorithms, it is unstable without control. The process is nonlinear and unstable with one input signal and several output signals. It is hence obvious that feedback of the state of the pendulum is needed to stabilize the pendulum. The aim of the study is to stabilize the pendulum such that the position of the carriage on the track is controlled quickly and accurately. The problem involves an arm, able to move horizontally in angular motion, and a pendulum, hinged to the arm at the bottom of its length such that the pendulum can move in the same plane as the arm. The conventional PID controller can be used for virtually any process condition. This made elimination the offset of the proportional mode and still provides fast response. In this paper, we have modelled the system and studied PID controller and state observer controller.Keywords: Control system, state observer technique, pole placement, conventional controller, inverted pendulumCite this ArticleKeerthi Chacko, Vimal Kumar, Abdul Ltheef, Sheeba V. Study and Design of PID Controller and State Observer Technique for Inverted Pendulum. Journal of Control & Instrumentation (JoCI). 2015; 6(2): 13–18p.

Downloads

Veröffentlicht

2015-06-01

Ausgabe

Bd. 6 Nr. 2 (2015)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.