Temperature Control of Heat Exchanger using Sliding Mode Control Law

Autores/as

  • A. R. Laware Padmashri Dr. VithalraoVikhe Patil College of Engineering, Ahmednagar, Maharashtra, India
  • D. B. Talange College of Engineering, Pune, Maharashtra, India
  • V. S. Bandal College of Engineering, Pune, Maharashtra, India

Palabras clave:

Shell and tube heat exchanger, SMC, FOPDT model, IMC, PID with feedback and feed forward architecture

Resumen

Shell and tube heat exchanger system is widely used in chemical plants as it sustains wide range of temperature and pressure. The main purpose of heat exchanger is to transfer heat from a hot fluid to a cooler fluid, so temperature control of outlet fluid is having prime importance. To control the temperature of outlet fluid of shell and tube heat exchanger, a conventional PID controller can be used. But due to inherent disadvantages of conventional control techniques, sliding mode controller is proposed to control the temperature of outlet fluid of shell and tube heat exchanger. The designed controller regulates the outlet fluid temperature to a desired set point in a shortest time irrespective of inlet process fluid temperature and flow rate variations and non-linearity. The proposed sliding mode controller gives better dynamic performance than the classical controllers, in terms of process speed, settling time, maximum overshoot and steady state error. Keywords: Shell and tube heat exchanger, SMC, FOPDT model, IMC, PID with feedback and feed forward architecture Cite this Article Laware AR, Talange DB, Bandal VS. Temperature Control of Heat Exchanger Using Sliding Mode Control Law. Journal of Control & Instrumentation. 2015; 6(1): 14–26p.

Biografía del autor/a

  • A. R. Laware, Padmashri Dr. VithalraoVikhe Patil College of Engineering, Ahmednagar, Maharashtra, India
    Instrumentation & Control dept.
  • D. B. Talange, College of Engineering, Pune, Maharashtra, India
    Electrical engineering dept.
  • V. S. Bandal, College of Engineering, Pune, Maharashtra, India
    Electrical engineering dept.

Descargas

Publicado

2015-03-26

Número

Vol. 6 Núm. 1 (2015)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.