Multi-Objective Particle Swarm Optimization based PID Tuning of Ball and Beam System

Autores/as

  • R. Monika Department of Electronics and Instrumentation Engineering, Kongu Engineering College, Erode, Tamil Nadu, India
  • M. Sasireka Department of Electronics and Instrumentation Engineering, Kongu Engineering College, Erode, Tamil Nadu, India
  • S.J. Suji Prasad Department of Electronics and Instrumentation Engineering, Kongu Engineering College, Erode, Tamil Nadu, India
  • A. Senthilkumar Department of Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering & Technology, Coimbatore, Tamil Nadu, India

Palabras clave:

Ball and beam system, PID controller, SIMC, PSO, MOPSO

Resumen

Ball and beam system is an unstable and nonlinear system which is specially designed for understanding various control engineering problems. The proportional integral and derivative (PID) controller is mostly used to stabilize the ball on the beam. Initially, Skogestad internal model control (SIMC) tuning method is used to design the PID controller for stabilizing the ball at desired position on the beam. The parameters of PID controller decide the performance of the ball and beam system. The performance of ball and beam system is analyzed with multi-objective particle swarm optimization (MOPSO) based PID controller and compared with SIMC based PID controller of ball and beam system. The simulation results show that the MOPSO based PID controller gives better performance when compared to the SIMC based PID controller of ball and beam system. Cite this Article R. Monika, M. Sasireka, S.J. Suji Prasad, A. Senthilkumar. Multi-Objective Particle Swarm Optimization based PID Tuning of Ball and Beam System. Journal of Control & Instrumentation. 2016; 7(1): 35–40p.

Descargas

Publicado

2016-05-12

Número

Vol. 7 Núm. 1 (2016)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.