110kV Primary Substation Automation Based on PLC and SCADA

Autores/as

  • Sneha K R
  • Chandra Bose K.N. Department of Electrical and Electronics Engineering, Govt. Engineering College, Trissur, Kerela, India

Palabras clave:

Supervisory control and data acquisition (SCADA), programmable logic controller (PLC), remote terminal units (RTU), intelligent electronic devices (IED), automatic load shedding (ALS)

Resumen

This research paper describes the automated switch control of 110kV primary substation by using SCADA and PLC ladder logic. The basic idea behind substation automation is to monitor the switchyards in substation. In substation, many relays and circuit breakers are used. When any one of the breakers are tripped, serious issues may happened and hence, it required monitoring and controlling through sophisticated system like SCADA. In this project, signals are given to the computer of the substation where there is an electronic control unit which controls the sequence of disconnecting the load. On the basis of controls from computer the breakers are managed through SCADA system. If there any problem occurs in plant, we can easily identify which part is tripped. After that we can troubleshoot the problem through manpower and monitor the substation. Objective of this project is to transform manual control system to automated switch control system. This paper analyses the performances of incoming feeders and outgoing feeders of 110kV substation for real time data monitoring by using SCADA wonderware intouch software. Also automate all the process taking place in the substation. The simulation based approach automated systems are demonstrated in this research. According to the simulation result, the proposed automated control system using PLC are met with the desired control environment with high performance stage, based on actual data available from 110kV substation.Cite this ArticleSneha KR, Chandra Bose KN. 110kV Primary Substation Automation Based on PLC and SCADA. Journal of Control & Instrumentation. 2016; 7(2): 5–13p.

Descargas

Publicado

2016-09-21

Número

Vol. 7 Núm. 2 (2016)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.