Modeling, Analysis and LQR Control of an EV Differential using IPMSM

Autori

  • Sumon Ghos
  • Mohammad Abdul Mannan Department of Electrical and Electronic Engineering, American International UniversityBangladesh (AIUB), Dhaka, Bangladesh

Parole chiave:

Electronic differential, steering angle, slope angle, linear quadratic regulator, interior permanent magnet synchronous motor

Abstract

Recently, the mechanical differential (MD) of vehicle has been replaced by electronic differential (ED) by means of electric motor. Electronic differential ensures dynamic and robust control of the vehicle behavior. The ED has been designed for an electrical vehicle (EV) based on IPMSM due to its some inherent advantageous features. The design of speed controller of an IPMSM mainly depends on its mathematical model. The mathematical model based speed controller has been developed without consideration of core loss. Practically, the performance of torque control is affected by the core loss. Hence, the core loss during the design of a control system should be considered to obtain precise torque as well as speed performance. Conventionally, the speed control strategy of IPMSM has been designed based on PI controller. The design and implementation procedure of PI controller are easier and the gains of it’s have been chosen by trial and error method. But, the overshoot and steady-state error cannot be minimized and the controller is not robust under the variation of load disturbance. In this paper linear quadratic regulator (LQR) based speed control of IPMSM is designed and analysis to apply in ED of an EV. The overall system has been demonstrated by simulation studies which are performed by Matlab/Simulink software. The simulation results show that the tracking of reference speed of IPMSM including core loss is achievable without any overshoot and steady-state error by the proposed designed LQR based optimal speed control. Moreover, the designed controller is robust under the variation of load torque. Cite this Article Sumon Kumar Ghos, Mohammad Abdul Mannan. Modeling, Analysis and LQR Control of an EV Differential using IPMSM. Journal of Control & Instrumentation. 2016; 7(2): 23–34p

Dowloads

Pubblicato

2016-10-07

Fascicolo

V. 7 N. 2 (2016)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.