Effect of Adaptation Gain in Model Reference Adaptive Control
Аннотация
Normally, the conventional controllers are used to get desired response when noise and disturbances are there but they cannot give desired response when the system parameters change. Due to the disturbances or any external effects, the system parameters may change. Dynamical system may face this type of problem because its dynamics may change with time. So, adaptive control can be used for this type of problem. Adaptive controller has some adjustment mechanism which will change the control law parameter according to the change in the system parameter, by which the controller parameter will change and required process response can be achieved. Here, adaptive control will be used with the model reference adaptive control (MRAC) with the MIT rule (Rule developed by a Massachusetts Institute of Technology). In MIT rule, the response totally depends on the value of a parameter which belongs to an adjustment mechanism of MRAC. The value of is very effective on the response of the process or system. The bound for the value of parameter can be achieved by trial and error method. If the value of parameter can be minimized with some optimization technique, then better response can be achieved. Here all the simulations are done in MATLAB Simulink. Keywords: Adaptive control, model reference adaptive control (MRAC), MIT rule Cite this Article Somaiya Jiten N, Shah Ankit K. Effect of Adaptation Gain in Model Reference Adaptive Control. Journal of Control and Instrumentation. 2017; 8(2): 1–8p.Опубликован
Выпуск
Раздел
Лицензия
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
_______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |