Effect of Fly Ash on the Damping Behaviour of Glass Fiber Reinforced Composite
Klíčová slova:
Fly ash, Modal analysis, Damping, Vibration, CompositeAbstrakt
Composite materials are advanced materials which have wide range of application in engineering field due to its numerous advantages. High strength to weight ratio is of utmost demand of major industries such as automobile and aerospace, which a composite material can easily cater. One of the most common methods is reinforcing hard phase materials into the polymer matrix. This improves the strength but also increases the cost of the composite. Therefore, inexpensive reinforcements or fillers are identified and used. In this paper the effects of fly ash as filler are investigated to improve the damping properties of polymer composite on a cantilever beams made up of glass fibers. Fabrication of filler filled composites for different concentration of fillers (5, 10, 15, 20 and 25 wt. %) with the matrix (Lapox C-51 resin) is done by using hand layup process. This paper presents the experimental study on damping characteristics of free vibration. Results show that the composite with 15% of filler by wt. has the highest damping of composites. Keywords: Fly ash, modal analysis, damping, vibration composite
Publikováno
Číslo
Sekce
Licence
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
_______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
