Analysis of Injection Moulding Process Parameters on PVC Material via Taguchi-ANOVA

Forfattere

  • Amit Kumar Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, INDIA
  • Aseem Dubey Department of Mechanical Engineering, KIET, Ghaziabad, U.P., India
  • Manoj Kumar Gaur Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, M.P., India
  • Vivek Samadhiya Department of Mechanical Engineering, MPCT, Gwalior, M.P., India

Nøgleord:

Injection moulding, Taguchi method, ANOVA

Resumé

This paper deals with the development of prediction model for injection moulding machineusing Taguchi. In this work, all the process parameters namely filling time (FT), refill time(RFT), tonnage time (TT) and ejector retraction time (ERT) are modeled using Taguchimethod. PVC (polyvinylchloride) taken as process material in this experimental work underoptimal working conditions. The influence of filling time (FT), refill time (RFT), tonnage time(TT) and ejector retraction time (ERT) on cycle time (CT) is examined in the process. Theexperimented result is examined through ANOVA. From the basis of experimented result viaTaguchi method, it is found that filling time (FT=23 sec) and tonnage time (TT=.68 sec) havesignificant effect on output parameter (CT) and the other parameters refill time (RFT) andejector retraction time (ERT) have insignificant effect.Keywords: Injection moulding, Taguchi method, ANOVA Cite this ArticleAmit Kumar, Aseem Dubey, Manojkumar Gaur, Vivek Samadhiya.Analysis of Injection Moulding ProcessParameters on PVC Material viaTaguchi-ANOVA. Journal ofExperimental & Applied Mechanics. 2015; 6(2): 13–21p. 

Downloads

Publiceret

2015-06-18

Nummer

Årg. 6 Nr. 2 (2015)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.