Optimization of Process Parameters in Electro-discharge Machining of EN24 Steel using Grey-Taguchi Method

Forfattere

  • Tanmay Jyoti Deka School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India
  • Asit Behera School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India
  • Kamal K. Joshi School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India

Nøgleord:

EDM, Taguchi, Grey-relational analysis, ANOVA, MRR, SR

Resumé

Electric Discharge Machining (EDM) is one of the nontraditional machining processes used to produce critical shape on hard or brittle conductive materials and it can also besuccessfully applied on materials that are extremely difficult-to-machine using traditional machining processes. In this experimental analysis the optimum machining parameters areestimated using Taguchi based method for EN24 steel which have wide range of application in aircraft, automotive and general engineering applications for example- propeller or gearshafts, connecting rods, aircraft landing gear components. Influence of various parameters on MRR and Surface roughness of EN24 steel has also been investigated in this analysis. Taguchi methodology with L9 orthogonal array was used to optimize specified parameters such as; current, pulse on time and flushing pressure Grey relational technique is used to convert multiobjective to single objective. Finally ANOVA concept is employed on multi SN ratio to find out the relative significance of machining parameter. It is found that current has maximum significance of 44.867% on response parameters. Current at 5Amp, pulse on time at 50 μs and flushing pressure at 0.6 Kg/m2 bears the optimal levels for MRR and SR combinedly.Cite this ArticleTanmay Jyoti Deka, Asit behera, KamalK. Joshi. Optimization of processparameters in electro-dischargemachining of EN24 steel using Grey-Taguchi method. Journal ofExperimental & Applied Mechanics.2016; 7(2): 48–53p.

Forfatterbiografier

  • Tanmay Jyoti Deka, School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India
    Student at KIIT University
  • Asit Behera, School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India
    Assistant Professor in school of mechanical engineering in KIIT University
  • Kamal K. Joshi, School of Mechanical Engineering, KIIT University, Bhubaneswar, Odisha, India
    Assistant Professor in school of mechanical engineering in KIIT University

Downloads

Publiceret

2016-07-19

Nummer

Årg. 7 Nr. 2 (2016)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.