Effect of Steel Slag and Bagasse Ash on Strength of Concrete

Forfattere

  • Rajesh Lalsing Shirale Department of Civil Engineering, Marathwada Institute of Technology, Aurangabad, Maharashtra, India
  • Keshav Raghunath Kale Department of Civil Engineering, Chatrapati Shahu Maharaj Shaikshanik Sanstha’s College of Engineering, Aurangabad, Maharashtra, India
  • Ajay Gulabrao Dahake Department of Civil Engineering, Maharashtra Institute of Technology, Aurangabad, Dr. Babasaheb Ambedkar Marathwda University, Aurangabad, Maharashtra, India

Nøgleord:

Compressive strength, flexural strength, tensile strength, steel slag, bagasse ash

Resumé

An experimental investigation was carried out to evaluate the strength properties of concrete. The concrete mix of M-50 grade was designed and produced by replacing steel slag partially with fine aggregate and bagasse ash partially with cement. The mix proportions were prepared with varying percentage of bagasse ash including one control mix of steel slag. Bagasse ash in concrete was replaced with 0, to 20% with an interval of 5% with cement by weight and one concrete mixture that contained 10% steel slag was considered as the control mix. Various strengths considered for investigations are compressive, flexural and split tensile. Cube of size 150 mmï‚´150 mmï‚´150 mm for compressive strength; beams of size 500 mmï‚´100 mmï‚´100 mm for flexural strength and cylinders of size 300 mm in depth ï‚´ 150 mm diameter for split tensile strength were cast. All the specimen were water cured up to 7 and 28 days and tested subsequently. Relations between compressive strength with all other strengths are developed. A comparison of result of modified steel slag concrete with that of normal concrete, showed significant improvement in the result of various strengths.Rajesh Lalsing Shirale, Keshav Raghunath Kale, Ajay Gulabrao Dahake. Effect of Steel Slag and Bagasse Ash on Strength of Concrete. Journal of Experimental & Applied Mechanics. 2017; 8(1): 1–10p.

Downloads

Publiceret

2017-02-17

Nummer

Årg. 8 Nr. 1 (2017)

Sektion

Review Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.