Experimental Study and Simulation on Microwave Drilling of Metals and Glasses

Autor/innen

  • Titto John George Department of Mechanical Engineering, Viswajyothi College of Engineering and Technology, Kerala, India
  • Apurbba Kumar Sharma
  • Pradeep Kumar

Schlagwörter:

Microwave Drilling, SEM

Abstract

Microwave heating is being developed to apply for a variety of engineering applications in the last few years due to some special advantages of using microwave. This paper presents a study on attempting microwave drilling of materials especially metals, as metal processing with microwave was a difficult task due to reflection of microwaves by metals at room temperature. A special fixture was developed to study the microwave drilling on metals and non metals and tests were conducted on Aluminium, Copper, Mild steel and Borosilicate glass inside a domestic microwave oven. Metals were drilled with microwave hybrid heating and glass was drilled with plasma generated through microwave. The specimens were characterised through SEM and simulations were done on microwave heating of metals and glass in a similar environment to drilling. Keywords: Microwave Drilling, SEM

Autor/innen-Biografie

  • Titto John George, Department of Mechanical Engineering, Viswajyothi College of Engineering and Technology, Kerala, India
    Assistant Professor in Mechanical Engineering

Downloads

Veröffentlicht

2014-05-08

Ausgabe

Bd. 5 Nr. 1 (2014)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.