Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage

Autor/innen

  • Arun Singh Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
  • Avadesh Kumar Sharma Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India

Schlagwörter:

Metal matrix composite, aluminium-magnesium alloy matrix, particulate reinforcement, B4C, micro structure, scanning electron microscope

Abstract

Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage of SiC as reinforcement; however, the same Al with B4C shows a decreasing trend. Vicker’s hardness of composites was measured. The hardness of composite increased as both percentage of both reinforcement increased. Tensile strength is also increased as increased content of reinforcement.   Keywords: Metal matrix composite, aluminium-magnesium alloy matrix, particulate reinforcement, B4C, micro structure, scanning electron microscope  Cite this Article Singh A, Sharma AK., Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage. Journal of Experimental & Applied Mechanics. 2015; 6(1): 1–6p.

Autor/innen-Biografien

  • Arun Singh, Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
    DEPARTMENT OF MECHANICAL ENGINEERING
  • Avadesh Kumar Sharma, Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
    Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage of SiC as reinforcement; however, the same Al with B4C shows a decreasing trend. Vicker’s hardness of composites was measured. The hardness of composite increased as both percentage of both reinforcement increased. Tensile strength is also increased as increased content of reinforcement.   Keywords: Metal matrix composite, aluminium-magnesium alloy matrix, particulate reinforcement, B4C, micro structure, scanning electron microscope

Downloads

Veröffentlicht

2015-03-02

Ausgabe

Bd. 6 Nr. 1 (2015)

Rubrik

Case Study

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.