Effect of Polymer Modified Steel Fiber Reinforced Concrete on Bond Strength

Authors

  • Uttam B. Kalwane D. Y. Patil School of Engineering and Technology, Lohagaon, Pune, Maharashtra, India
  • Ajay G. Dahake Civil Engineering Department, Marathwada Institute of Technology, Aurangabad, Maharashtra, India
  • Vasudev R. Upadhye Civil Engineering Department, Marathwada Institute of Technology, Aurangabad, Maharashtra, India

Keywords:

Pullout test, bond strength, steel fiber reinforced concrete, polymer modified steel fiber reinforced concrete

Abstract

In this experimental investigation, the effect on bond strength (pullout test) of polymermodified steel fibers in concrete is studied. Varying volume fraction of steel fibers from 0 to7% at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight ofcement were used. For this test, specimen of size 150 mmï‚´ 150 mmï‚´ 150 mm with 16 mmhigh yield deformed bar of length 650 mm is placed at the centre of cube and 150 mmembedded in concrete. Pullout test on specimens were carried out on universal testingmachine.Keywords: Pullout test, bond strength, steel fiber reinforced concrete, polymer modified steel fiber reinforced concrete Cite this Article Kalwane Uttam B, Dahake Ajay G, Upadhye Vasudev R. Effect of Polymer Modified Steel Fiber Reinforced Concrete on Bond Strength. Journal of Experimental & Applied Mechanics. 2015; 6(2): 33–43p.

Author Biographies

  • Uttam B. Kalwane, D. Y. Patil School of Engineering and Technology, Lohagaon, Pune, Maharashtra, India
    Principal
  • Ajay G. Dahake, Civil Engineering Department, Marathwada Institute of Technology, Aurangabad, Maharashtra, India
    Asso. Prof. and Head of Civil Engineering Department
  • Vasudev R. Upadhye, Civil Engineering Department, Marathwada Institute of Technology, Aurangabad, Maharashtra, India
    Asso. Prof. and Head of Civil Engineering Department

Downloads

Published

2015-06-22

Issue

Vol. 6 No. 2 (2015)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.