Report on the Separation Efficiency with Separation Time in the Microfluidic Lab-on-a-Chip Systems Fabricated by Polymers in this 21st Century of 3rd Millennium

Autori

  • Subhadeep Mukhopadhyay Department of Electronics and Computer Engineering, National Institute of Technology, Ministry of Human Resource Development (Government of India), Yupia, Papum Pare, Arunachal Pradesh, India

Parole chiave:

Polymer, lab-on-a-chip, separation efficiency, separation time

Abstract

In this report, author has fabricated total 1157 individual microfluidic devices including many microfluidic lab-on-a-chip systems by the maskless lithography, hot embossing lithography, direct bonding technique, clamping, and surface modification techniques, by his own handson completely. Author has used total 30 individual electrical and non-electrical instruments (including the cleanroom equipment) to perform all experiments of this report by his own hands-on completely. Many microfluidic flow phenomena have been experimentally investigated in this report using the polymethylmethacrylate (PMMA) and SU-8 as polymers. Also, the separation of polystyrene microparticles from aqueous microparticle suspensions have been experimentally investigated in the microfluidic lab-on-a-chip systems considering the separation efficiency and separation time as two experimental parameters of these investigations for bioengineering applications. Cite this Article Subhadeep Mukhopadhyay. Report on the Separation Efficiency with Separation Time in the Microfluidic Lab-on-a-Chip Systems Fabricated by Polymers in this 21st Century of 3rd Millennium. Journal of Experimental & Applied Mechanics. 2016; 7(3): 20–37p. 

Dowloads

Pubblicato

2016-11-18

Fascicolo

V. 7 N. 3 (2016)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.