Characterization for Metal Matrix Composite of Aluminium-Magnesium Alloy with SiC and B4C Reinforcement with Different Weight Percentage

著者

  • Arun Singh Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior-474005, M.P., India

キーワード:

Metal matrix composite、 aluminium-magnesium alloy matrix、 particulate reinforcement、 B4C、 micro structure、 scanning electron microscope

要旨

Metal matrix composites (MMCs) based on magnesium alloys are excellent candidates for engineering light structure materials, and have great potential in automotive, high performance defence and aerospace applications. Crackpropagation as well as delamination along to the interface are two major failure modes of the multilayered composites subjected over bending load. In this paper, the study is focused on the preparation of metal-matrix composites with SiC and B4C reinforcement in particulate form. The compo casting method was adopted to prepare the composite due to easy and effective method for dispersion particulate. The composite microstructure is subsequently discussed with respect to grain refinement, reinforcement distribution, and interfacial characteristics. The mechanical properties like tensile strength and hardness of the magnesium matrix composites are also reported. The micro structural features of the fabricated composite materials are evaluated using a scanning electron microscope (SEM).Cite this Article Arun Singh. Characterization for metal matrix composite of aluminium-magnesium alloy with SiC and B4C reinforcement with different weight percentage. Journal of Experimental & Applied Mechanics. 2015; 6(3): 73–79p.

著者略歴

  • Arun Singh、 Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior-474005, M.P., India
    Dept of Mechnical Engineering

ダウンロード

発行日

2015-12-29

巻号

巻 6 号 3 (2015)

セクション

Case Study

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.