Flexure of Thick Cantilever Beams using Trigonometric Shear Deformation Theory

Autores

  • Yuwaraj M. Ghugal Department of Applied Mechanics, Govt. College of Engineering Station Road, Osmanpura, Aurangabad-431005
  • Ajay G. Dahake

Palavras-chave:

Thick beam, Trigonometric shear deformation, Principle of virtual work, Equilibrium equations, Displacements, Stresses

Resumo

A trigonometric shear deformation theory for flexural analysis of thick beams, taking into account transverse shear deformation effects, is developed. The number of variables in the present theory is same as that in the first order shear deformation theory. The sinusoidal function is used in displacement field in terms of thickness coordinate to represent the shear deformation effects. The noteworthy feature of this theory is that the transverse shear stresses can be obtained directly from the use of constitutive relations with excellent accuracy, satisfying the shear stress free conditions on the top and bottom surfaces of the beam. Hence, the theory obviates the need of shear correction factor. Governing differential equations and boundary conditions are obtained by using the principle of virtual work. The thick isotropic beams are considered for the numerical studies to demonstrate the efficiency of the theory. It has been shown that the theory is capable of predicting the local effect of stress concentration due to fixity of support. The cantilever isotropic beams subjected to linearly varying loads are examined using the present theory. Results obtained are discussed critically with those of other theories.Keywords: Thick beam, Trigonometric shear deformation, Principle of virtual work, Equilibrium equations, Displacements, Stresses

Biografia do Autor

  • Yuwaraj M. Ghugal, Department of Applied Mechanics, Govt. College of Engineering Station Road, Osmanpura, Aurangabad-431005
    Professor and HeadDepartment of Applied Mechanics,

Downloads

Edição

Vol. 3 N.º 1 (2012)

Secção

Review Articles

Licença

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.