Experimental Determination of Tire Stiffness using Nitrogen

Autores

  • P. A. Narwade Department of Mechanical Engineering, Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, Gujarat, India
  • C. R. Shah Department of Mechanical Engineering, Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, Gujarat, India
  • P. Y. Mhaske Department of Mechanical Engineering, Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, Gujarat, India

Palavras-chave:

Amplitude, inflation pressure, tire stiffness and deflection

Resumo

Vehicle stability generally depends on the tire forces and torque at wheel. Forces and reactions generated at tire play major role in the control of vehicle. On application of torque to the wheel, due to contact friction between road, tire pushes on the ground and moves forward and backward. Tire also supports the load of vehicle and deforms under load for the flexibility and damping. The stiffness of fluid in tire is the important parameter for tire stability and effectiveness. Inflation pressure in tire decides the stiffness and damping in the tire. The objective of this paper is to discuss the experimental results of tire stiffness with air and nitrogen. Tire stiffness of Tata Nano car with size P135/70R12 is tested on test rig for air and nitrogen and compared for various loads. Primarily load deflection simulation of Tire is done on Ansys software and validated with experimental result for air and then other tests are performed. Optimized tire stiffness is obtained for minimum amplitude of vibration.  Cite this Article P.A. Narwade, C.R. Shah, P.Y. Mhaske. Experimental Determination of Tire Stiffness using Nitrogen. Journal of Experimental & Applied Mechanics. 2016; 7(3): 13–19p.  

Biografia do Autor

  • P. A. Narwade, Department of Mechanical Engineering, Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, Gujarat, India
    Assistant Professor, Mechanical Engg. Department,

Downloads

Publicado

2016-10-17

Edição

Vol. 7 N.º 3 (2016)

Secção

Research Articles

Licença

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.