A Novel High Gain Cavity Backed Micro strip-fed Circular Triangular – Corner Fractal Antenna for UWB Applications

Autores/as

  • Rajesh Kumar Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
  • Amanpreet Kaur

Palabras clave:

fractal Antenna, UWB, Federal communication commission (FCC), Cavity

Resumen

In the current article, a novel micro strip-fed circular triangular corner fractal unidirectional antenna with high gain is proposed for ultra wideband (UWB) applications. This antenna consists of circular patch with triangular slot with three iterations. A prototype of antenna has been designed on FR4 substrate having dielectric constant 4.4 and thickness 1.6 mm. This reference antenna is then placed in a cavity made up of FR4 having thickness same as that of substrate of antenna. The gain of proposed antenna without cavity is on an average 4.146 dB and when placed in a cavity is 6 dB. There is maximum gain increase by 2.8 dB at 11 GHz using this technique. This proposed circular triangular corner fractal antenna with high gain cavity can be used for UWB system, microwave imaging, precision position system and radar tracking system since it covers a band of frequencies from 3.0481-16.388 GHz.Keywords: Federal Communication Commission (FCC), fractal antenna, UWB, cavityCite this Article: Rajesh Kumar, Amanpreet Kaur. A Novel High Gain Cavity Backed Micro Strip-Fed Circular Triangular Corner Fractal Antenna for UWB Applications. Journal of Electronic Design Technology. 2015; 6(1): 19-24p. 

Biografía del autor/a

  • Rajesh Kumar, Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
    Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala

Descargas

Publicado

2015-03-31

Número

Vol. 6 Núm. 1 (2015)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.