A Novel Technique for Improvement in Front-to-Back Ratio of MSA for WLAN/WiMAX using Corrugated Dielectric Substrate as a Reflector

Forfattere

  • Baljinder Singh Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
  • Amanpreet Kaur

Nøgleord:

Microstrip Antenna (MSA), Front to back ratio (FBR), Corrugated reflector, Grooves, and partial ground

Resumé

In this paper the design of a microstrip antenna (MSA) with corrugated dielectric reflector is proposed to improve the front-to-back ratio (FBR) and reduce the back lobes in radiation pattern of the antenna. The designed antenna operates at 5.8 GHz and simulated on CSTMWS'10 software. Simulation results show that proposed antenna has 21.8 dB higher FBR than that of conventional MSA.Keywords: Microstrip antenna (MSA), front-to-back ratio (FBR), corrugated reflector, grooves, partial ground.Cite this Article: Singh B. A, Kaur A. Novel Technique for Improvement in Front-to-Back Ratio of MSA for WLAN/WiMAX using Corrugated Dielectric Substrate as a Reflector. Journal of Electronic Design Technology. 2015; 6(1):25-29p.

Forfatterbiografi

  • Baljinder Singh, Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
    Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala

Downloads

Publiceret

2015-03-31

Nummer

Årg. 6 Nr. 1 (2015)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.