Design of Microsmart Grid Fuzzy Controlled Model for Sustainable Power Supply in Rural India

Autor/innen

Abstract

 In   India is facing acute shortage of electricity especially in rural sectors due to shrinking of conventional grid supply. The expansion of grid network has become almost standstill due to depletion of raw material (i.e., fuel, coal, etc.) day by day. As a result, the sustainability of utility (grid) power supply to rural houses has become poor. In this paper, a fuzzy control-based microsmart grid model has been proposed and developed for Indian rural society to overcome such constraints by integrating renewable sources like solar, etc., with conventional grid. Attempt has been made to provide good quality 24 × 7 power supply to rural houses for a base load of 300 W with grid power saving up to 50% or more. Sensitivity analysis on varying load profile up to 1 kW on a prototype module has been done and implemented in an Indian village of Jharkhand. Impact study of rural electrification on generation of self/wage employment through vocational literacy classes among potential youth in rural society, has been carried out over a period of one year with encouraging results.Keywords: Solar energy sources, smart grid, inverter, fuzzy logic, load sensitivity DG: diesel generator, PV: photovoltaicCite this Article:Prathiba VS, Katiki Nikhil, Singh SN. Design of microsmart grid fuzzy controlled model for sustainable power supply in rural India. Journal of Electronic Design Technology. 2015; 6(1): 8-13p. 

Autor/innen-Biografien

  • V.S. Prathiba, National Institute of Technology Jamshedpur
    Department of Electronics and Communication Engineering and 1
  • Nikhil Katiki, National Institute of Technology Jamshedpur
    Department of Electronics and Communication Engineering and 1
  • S.N. Singh, National Institute of Technology Jamshedpur
    Department of Electronics and Communication Engineering and 1

Downloads

Zusätzliche Dateien

Veröffentlicht

2015-03-30

Ausgabe

Bd. 6 Nr. 1 (2015)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.