System Preplanning Theory by using Failure vs. Reliability Analysis of DSP-270P Poly Crystalline SPV System: A Comparative Approach
Abstract
A preplanning idea is always required before installing any new system. So, we present an approach for technical preplanning excluding mechanical designing and cost through this paper, to make the system more reliable as well as proper array selection scheme through the comparative analysis. It is implemented by using the comparative approach of optimized and non-optimized output for DSP270P poly-crystalline SPV array through PSO, P&O and GA techniques with the help of practical hardware and simulation approach of MATLAB-10 and ode64, aiming the development of various modern power semiconductor devices for any large or bulky SPV system network. Under this idea, the computation of output/solar power, failure rate and reliability analysis of this SPV system for different number of panels has been covered. In-spite of this, DSP210D module is compared with the different types of solar array modules with respect to the number of panels. The initiative step is done by using the data sheet of manufacturer for the comparative study under elementary platform, especially for DSP 270P (Poly Crystalline) and KS-M 280 W solar models (Mono Crystalline), BP SX 150 and SPP 280-24 solar models (Poly Crystalline) and other different modules. All the graphs for several key parameters are plotted in MATLAB.Keywords: PV, SPV, MPPT, PSO, GA, STC, NOCT
Veröffentlicht
Ausgabe
Rubrik
Lizenz
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
