A Hexagonal Sierpinski Gasket Antenna with a Microstrip Feed Line and a Stub for UWB Applications

Авторы

  • Kamljeet Kaur Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
  • Amanpreet Kaur

Ключевые слова:

MSA, Sierpiski Gasket Fractals, Return Loss, Gain, Bandwidth

Аннотация

In this paper a Sierpinski gasket hexagonal antenna is proposed with a feed line having a stub attached to it. Three iterations of the proposed antenna geometry were done and with this improved feeding technique for four resonant bands of operation from 2.86 to 3.3 GHz, 3.758–4.313 GHz, 7.514–8.5468 GHz and 12.352–10.976 GHz were obtained. The antenna is suitable for ultra wideband (UWB) and radiolocation applications. The proposed antenna was designed in CST MWS V10 and it shows a gain of 5.93 dB, 5.95 dB, 4.63 dB and 5.53 dB at the respective four bands of operation.Keywords: Sierpinski gasket antenna, feed line, microstrip, stub, ultra widebandCite this Article: Kaur K. A, Kaur A. Hexagonal Sierpinski Gasket Antenna with a Microstrip Feed Line and a Stub For UWB Applications. Journal of Electronic Design Technology. 2015; 6(1): 14–18p.

Биография автора

  • Kamljeet Kaur, Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala
    Assistant professor Electronics and Communication Engg. Department Thapar University, Patiala

Загрузки

Опубликован

2015-03-31

Выпуск

Том 6 № 1 (2015)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.