Damping Techniques for Controlling Edgewise Vibration of Wind Turbine Blades

Autoři

  • Sandip A. Kale Associate Professor, Mechanical Engineering Department, Trinity College of Engineering and Research, Pune
  • Rahul S. Patil

Abstrakt

AbstractEdgewise vibrations with low aerodynamic damping are of particular concern in modern multi-megawatt wind turbines, as large amplitude cyclic oscillations may significantly shorten the life-time of wind turbine components, and even lead to structural damages or failures. In this paper, five types of damping methods are studied. The tuned liquid dampers utilize the sloshing motion of the fluid to suppress structural vibrations and become a natural candidate for damping vibrations in rotating wind turbine blades. The actuator damping control is based on a pair of actuators/active tendons mounted inside each blade, allowing a variable control force to be applied in the edgewise direction. The roller damper is used to keep in control the centrifugal acceleration of the rotating blade with a relatively small mass ratio for suppressing edgewise vibrations effectively. The magneto rheological (MR) dampers are mounted inside blades and appropriately manipulated according to a prescribed control system which produces the required voltage to be input to the damper so that a desirable damper force can be produced. The viscoelastic foam dampers are sandwiched in between two damping elements to absorb varying intensities of winds without extra provisions. A comparative study based on a number of parameters is carried out on the five dampers and their respective conclusions are drawn. The conclusions show the configuration of the damper in the turbine blade to give maximum efficiency and effective damping during operation. Keywords: Edgewise vibrations, wind turbine blades, magnetorheological dampers Cite this ArticleRahul S. Patil, Sandip A. Kale. Damping Techniques for Controlling Edgewise Vibration of Wind Turbine Blades. Journal of Energy Environment and Carbon Credits. 2017; 7(2): 26–33p.

Stažení

Publikováno

2017-10-10

Číslo

Vol 7 No 2 (2017)

Sekce

Review Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.