Stabilizing Hydrodynamic Bearing Using H∞ Loop Shaping Design Procedure
Аннотация
This paper proposes the idea of H∞ loop shaping to design an active stabilizing controller for short journal bearing. Hydrodynamic bearings have viscous friction and stiffness force associated with fluid film layer sheared during the motion of bearing; at high speed, they can land up too wide and considerable heat is generated. As a result instability occurs, thus working inefficiently that can be the cause of material damage and also producing inaccurate result. So, to minimize the error and making the system stable, a controller is designed using robust control (H∞ loop shaping) approach. Firstly, the system is modelled by mathematical approach, and then compensator is selected to make singular value of nominal control system becoming the desired open loop gain. Finally, H∞ loop shaping controller is designed based on robust stabilization theory. Implementation of this controller is cost efficient and reduces system complexity of short journal bearing setup. Keyword: H∞ loop shaping, short journal bearing, robust control Cite this Article Siva Abhishek SJ, Niranjan Kumar Gupta, Abhro Mukherjee et al. Stabilizing Hydrodynamic Bearing Using H∞ Loop Shaping Design Procedure. Journal of Instrumentation Technology and Innovations. 2016; 6(3): 8–13p.
Опубликован
Выпуск
Раздел
Лицензия
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
