Analysis and Design of Innovative Double H Metamaterial Structure for Amelioration in Patch Antenna Parameters

作者

  • Bimal Garg
  • Dauood Saleem Madhav Institute of Technology and Science

##semicolon##

SSRR (Square Split Ring Resonator)##common.commaListSeparator## Rectangular Microstrip Patch Antenna (RMPA)##common.commaListSeparator## Impedance bandwidth##common.commaListSeparator## Return loss##common.commaListSeparator## Nicolson-Ross-Weir (NRW

摘要

 A rectangular microstrip patch antenna along with a SSRR based “Double H” shaped metamaterial is proposed and analyzed at a height of 3.2 mm from the ground plane. This work is mainly focused on increasing the potential parameters of microstrip patch antennas. The patch antenna along with the proposed metamaterial structure is designed to resonate at 1.84GHz. The impedance bandwidth of the patch antenna along with the proposed metamaterial structure is improved by 12.9MHz and return loss is reduced by 9.89dB. All the simulation work is done by using CST-MWS Software. Double-Negative properties (Negative Permeability and Permittivity) of the proposed metamaterial structure have also been verified using Nicolson-Ross-Weir method (NRW). Keywords: SSRR (Square Split Ring Resonator), Rectangular Microstrip Patch Antenna (RMPA),  Impedance bandwidth, Return loss, Nicolson-Ross-Weir (NRW 

作者簡介

  • ##submission.authorWithAffiliation##
    I am pursuing Master in Engineering in Electronics Department from Madhav Institute of Technology and Science in last semester.

下載

##submission.additionalFiles##

出版日期

2013-02-07

期號

卷 2 期 3 (2012)

分類

Research Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.