Experimental Demonstration on Fabrication Techniques and Recording of Leakage-free Surface-Driven Capillary Flow in the Dual Sudden Expansion Microchannels

Авторы

  • Subhadeep Mukhopadhyay Department of Electronics and Computer Engineering, National Institute of Technology, Yupia, District-Papum Pare, Arunachal Pradesh, India

Ключевые слова:

Hot embossing, PMMA, sudden expansion, water

Аннотация

Dual sudden expansion polymethylmethacrylate (PMMA) microchannels have been fabricated by the maskless lithography, hot embossing lithography, direct bonding technique, and atmospheric pressure air dielectric barrier discharge (DBD) plasma processing. The surface-driven capillary flow of dyed water is faster on the processed PMMA surface than the pristine PMMA surface. The surface-driven capillary flow of dyed water is slower in the wider portion of any dual sudden expansion microchannel. This experimental demonstration is highly useful to fabricate the microfluidic lab-on-a-chip systems.Cite this ArticleSubhadeep Mukhopadhyay. Experimental Demonstration on Fabrication Techniques and Recording of Leakage-free Surface-Driven Capillary Flow in the Dual Sudden Expansion Microchannels. Journal of Modern Chemistry & Chemical Technology. 2017; 8(2): 5–9p.

Загрузки

Опубликован

2017-09-24

Выпуск

Том 8 № 2 (2017)

Раздел

Review Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.