Selection and Preparation of Solvent for Wax Dissolution in Heavy Crude Oil Wells

Autor/innen

  • Shirsendu Banerjee Department of Petroleum Engineering, Indian School of Mines, Dhanbad, Jharkhand, India
  • Sunil Kumar Department of Petroleum Engineering, Indian School of Mines, Dhanbad, Jharkhand, India
  • Ajay Mandal Department of Petroleum Engineering, Indian School of Mines, Dhanbad, Jharkhand, India
  • Tarun Kumar Naiya Department of Petroleum Engineering, Indian School of Mines, Dhanbad, Jharkhand, India

Schlagwörter:

Asphaltenes, wax deposition, dispersant, wax dissolution, soaking time

Abstract

Remedial measures for wax deposition problems in production wells are very hectic due to production down time and expenditure required for removal of heavy and waxy crude oil. Chemical treatment techniques with solvent formulation derived from many laboratory experiments were carried out with the waxy crude oil sample to recover the solidified wax inside the pipelines and wellbores. A list of chemical solvents including three dispersants was mixed in different volumetric compositions to study the solubility of the crude oil. The solvent mixture with optimum solubility among them was identified and suggested for further experiments on a laboratory prototype to measure the production rate at different temperatures ranging from the pour point of crude oil to 90°C. A conclusion was established for the best mixture of solvents for wax dissolution based on availability, toxicity, flammability and other major contributing factors. Cite this ArticleShirsendu Banerjee, Sunil Kumar, Ajay Mandal, Tarun Kumar Naiya. Selection and Preparation of Solvent for Wax Dissolution in Heavy Crude Oil Wells. Journal of Modern Chemistry & Chemical Technology. 2016; 7(1): 50–57p.

Autor/innen-Biografie

  • Shirsendu Banerjee, Department of Petroleum Engineering, Indian School of Mines, Dhanbad, Jharkhand, India
    Department of Petroleum Engineering, Indian School of Mines, Dhanbad

Downloads

Veröffentlicht

2016-05-05

Ausgabe

Bd. 7 Nr. 1 (2016)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.