Design and Analysis of Pressure Vessel Pan (shell) of Conventional Jacket Type

Авторы

  • Harshal Patel Department of Mechanical Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India
  • Mitul Rana Department of Mechanical Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India
  • Divyanshu Rohit Department of Mechanical Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India
  • Harikrushna Dobariya Department of Mechanical Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India

Ключевые слова:

Conventional jacket type pressure vessel, DIN standard, thermal analysis, ANSYS, CREO

Аннотация

Pressure vessels are leak proof containers, as the name implies, their main purpose is to contain a given medium under pressure and temperature. Pressure vessels are commonly used in industry to carry both liquid and gases under required pressure and temperature limit. This pressure and temperature comes from an external source or by the application of heat from a direct or indirect source or any combination of them. This project deals with design and analysis of conventional type pressure vessel for industry. This project investigates, failure of conventional jacket type vessel on basis of thermal analysis, the work is carried out by the designing of pressure vessel as per the DIN standard, for given design conditions for various parameters. In that analysis and designing is carried out by ANSYS and CREO softwareCite this Article Harshal Patel, Mitul Rana, Divyanshu Rohit et al. Design and analysis of pressure vessel pan (shell) of conventional jacket type. Journal of Modern Chemistry & Chemical Technology. 2017; 8(1): 26–31p.

Биография автора

  • Harshal Patel, Department of Mechanical Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India
    mechanical engineering

Загрузки

Опубликован

2017-04-20

Выпуск

Том 8 № 1 (2017)

Раздел

Review Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.