Establishing Empirical Relationships to Predict Grain Size and Hardness of Pulsed Current Microplasma Arc Welded Inconel 625 Sheets

Autori

  • Siva Prasad Kondapalli ASSISTANT PROFESSOR,ANIL NEERUKONDA INSTITUTE OF TECHNOLOGY & SCIENCES, VISAKHAPATNAM
  • Srinivasa Rao Chalamalasetti ASSOCIATE PROFESSOR, ANDHRA UNIVERSITY, VISAKHAPATNAM
  • Nageswara Rao Damera VICE CHANCELLOR, CENTURION UNIVERSITY OF TECHNOLOGY & MANAGEMENT,ODISHA

Parole chiave:

Pulsed current microplasma arc welding, SS304L, grain size, hardness, design of experiments, ANOVA.

Abstract

 Nickel alloys have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metallic bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current microplasma arc welding was found beneficial due to its advantages over the conventional continuous current process. The paper focuses on developing mathematical models to predict grain size and hardness of pulsed current microplasma arc welded Inconel 625 nickel alloy. Four factors, five level, central composite rotatable design matrix is used to optimize a number of experiments. The mathematical models have been developed by response surface method. The adequacy of the models is checked by ANOVA technique. By using the developed mathematical models, grain size and hardness of the joints can be predicted with 99% confidence level. Contour plots are drawn to study the interaction effect of pulsed current microplasma arc welding parameters on fusion zone grain size and hardness of Inconel 625 weld joints. Keywords: Pulsed current microplasma arc welding, SS304L, grain size, hardness, design of experiments, ANOVA. 

Biografie autore

  • Siva Prasad Kondapalli, ASSISTANT PROFESSOR,ANIL NEERUKONDA INSTITUTE OF TECHNOLOGY & SCIENCES, VISAKHAPATNAM
    MECHANICAL ENGINEERING
  • Srinivasa Rao Chalamalasetti, ASSOCIATE PROFESSOR, ANDHRA UNIVERSITY, VISAKHAPATNAM
    MECHANICAL ENGINEERING
  • Nageswara Rao Damera, VICE CHANCELLOR, CENTURION UNIVERSITY OF TECHNOLOGY & MANAGEMENT,ODISHA
    MECHANICAL ENGINEERING

Dowloads

Pubblicato

2011-12-24

Fascicolo

V. 1 N. 3 (2011)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.