Solidification Curve Analysis of Cylindrical Casting by FEM

Autoři

  • Dharmesh Barodiya
  • M.D. Mahajan Department of Industrial and Production Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore, Madhya Pradesh, India
  • Shaheen Beg Mughal Department of Industrial and Production Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore, Madhya Pradesh, India

Klíčová slova:

Sand casting, ADC 12, solid cylinder, K type thermocouple, Autonix temperature indicator, Procast.

Abstrakt

In casting process, molten metal is solidified in mould cavity. Solidification process majorly classify into three different sections: (i) liquefaction (ii) solidify (iii) after solidification. In all three processes, one parameter which is called 'IHTC' (Intermediate Heat Transfer Coefficient), is varies with time. IHTC coefficient depends on shape, size, type of casting etc., so, it is continuously varies with all dependent functions. So, establishment of IHTC value is a very difficult task and hot cake between researchers. Various methods are available for establishment of IHTC value, like inverse method. In this study we establish IHTC value via inverse methodology. Solid cylinder of ADC 12 Material and sand casting process taken as part of analysis. K-type thermocouple and Autonix temperature indicator are used for temperature measurement. ADC 12 (Al alloys) material is used in various application such as automotive transmission system, escalator steps barbeque covers, oil pumps. Pro cast is used for simulation purpose. After complete experiment and simulation we are establishing IHTC value which is 2000 w/m2-k.  Cite this Article Dharmesh Barodiya, Mahajan MD, Shaheen Beg Mughal. Solidification Curve Analysis of Cylindrical Casting by FEM. Journal of Materials & Metallurgical Engineering. 2016; 6(3): 44–49p. 

Stažení

Publikováno

2016-12-26

Číslo

Vol 6 No 3 (2016)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.