Dry Sliding Wear Behavior of Al2O3-TiO2 Coated Ti6Al4V Alloy based on Taguchi Method

Autoři

  • M. Raja Roy Department of Mechanical Engineering, Anil Neerukonda Institute of Technology and Sciences, Visakhapatnam, Andhra Pradesh, India
  • Ramanaiah N Department of Mechanical Engineering, Andhra University College of Engineering-Autonomous, Visakhapatnam, Andhra Pradesh, India
  • Sundara Siva Rao B.S.K. Department of Mechanical Engineering, Andhra University College of Engineering-Autonomous, Visakhapatnam, Andhra Pradesh, India

Klíčová slova:

Detonation spray, Ti6Al4V, Surface coatings, Wear, Taguchi’s orthogonal array, ANOVA

Abstrakt

Ti6Al4V alloys are extensively used as implant material for bio-medical applications due to their high specific strength. But, their poor wear resistance results in formation of wear debris in implants and causing soreness. In this work, Al2O3-TiO2 coatings were applied to improve the wear resistance and hardness. Al2O3-TiO2 coatings are deposited on the substrate with 100, 200, 300, 400 μm thickness using detonation spray (DS). Pin on disc wear tests have been carried out with ASTM G-99 standard test procedure. Wear of the coated specimens was studied using Taguchi method and optimum parameters for decreasing the wear were determined. The predicted values and experimental values were good in agreement, and confirmed by using validation experiment.Cite this Article Raja Roy M, Ramanaiah N, Sundara Siva Rao BSK. Dry sliding wear behavior of Al2O3-TiO2 coated Ti6Al4V alloy based on Taguchi method. Journal of Materials & Metallurgical Engineering. 2017; 7(2): 28–34p.

Biografie autora

  • M. Raja Roy, Department of Mechanical Engineering, Anil Neerukonda Institute of Technology and Sciences, Visakhapatnam, Andhra Pradesh, India
    Sr. Assistant ProfessorMechanical Engineering Department

Stažení

Publikováno

2017-09-15

Číslo

Vol 7 No 2 (2017)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.