Reduction of Shrinkage-Porosity Defects in Sand Casting Using Finite Element Analysis: A Review

Autores/as

  • A V Vaishnav Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • M S Kagthara Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • H H Makwana Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India

Palabras clave:

Sand Casting, Shrinkage-Porosity, Casting Simulation

Resumen

Today production of casting is easy but market requirement is quality casting. Earlier casting is made with large no. of defects due to large no. of process parameter in casting process. Specially, to predict phase transformation is very critical. As the problem of automation in process, shortage of skill labour now a days; casting simulation requirement is high and it is identifies defects earlier without making actual casting. This process reduces time and cost. Many casting defects occur like; hot tears shrinkage-porosity etc. at the time of solidification of casting. Casting simulation software is very much helpful to get quality casting. This paper reviews the details of solidification of castings in foundries using computer simulation. In this review paper study is done to reduce shrinkage porosity defects in sand casting component.Cite this Article Vaishnav A.V., Kagthara M. S., Makwana H. H. Reduction of Shrinkage-Porosity defects in sand casting using finite element analysis: a review. Journal of Materials & Metallurgical Engineering. 2016; 6(1): 1–5p.

Descargas

Publicado

2016-02-03

Número

Vol. 6 Núm. 1 (2016)

Sección

Review Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.