Effect of Pin Profile on Micro Structure and Mechanical Properties of Friction Stir Welded AZ31B Magnesium Alloy

Autores/as

  • Piyush Gulati Department of Mechanical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India
  • Dinesh Kumar Shukla Department of Mechanical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India

Palabras clave:

Friction Stir Welding, Grain size, Mechanical properties, Microstructure

Resumen

Friction Stir Welding (FSW) is a solid state welding technique which was developed primarily for joining soft metal alloys. The aim of the present work was to develop a defect free friction stir joint of magnesium AZ31B sheets and to investigate the microstructural and mechanical properties of the weld. Two types of tool pins namely cylindrical and truncated conical pin profiled tools have been used to analyze its effect on the weld quality. Mechanical properties of different zones were determined by Vicker hardness test and Impact energy absorption test. Microstructure of the welded specimens was analyzed and mean grain size and grain number were measured. Cite this Article Piyush Gulati, Dinesh Kumar Shukla. Effect of pin profile on micro structure and mechanical properties of Friction Stir Welded AZ31B Magnesium alloy. Journal of Materials & Metallurgical Engineering. 2016; 6(3): 1–11p. 

Biografía del autor/a

  • Piyush Gulati, Department of Mechanical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India
    School of Mechanical Engineering, Assistant Professor
  • Dinesh Kumar Shukla, Department of Mechanical Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
    Mechanical Engineering Department, Associate Professor

Descargas

Publicado

2016-11-17

Número

Vol. 6 Núm. 3 (2016)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.